Setup Report, Page 1 Key
Printing Reports E-3
Printing Reports
Setup Report, Page 1 Key
ቢ
This is the serial number for your printer.
ባ This is the time of day the Setup Report was printed, shown in the upper left corner as a
clock face, and in the lower right corner as text.
ቤ This section lists all of the current values for the Printing Menu settings. If you have
installed an HCO, you will also see the outbin, joboffset, and HCI-alias settings.
ብ This section lists all of the current values for the Configuration Menu settings.
ቦ This section lists all of the current values for the PCL Menu settings.
ቧ This section lists all of the current values for the Comms (Communications) Menu
settings.
ቨ This section lists all of the current values for the Maintenance Menu settings.
ቩ This section lists all of the current values for the PapSize Menu settings.
ቪ This section lists information about the current state of the printer and some statistics about
its operation.
The Total page count is the number of pages printed since the last report was printed.
Paper Height and Width are the physical dimensions of the paper in the current INTRAY. Print
Width and Height are the dimensions of the image printed on the paper.
Total RAM size is the amount of memory in the printer.
Page RAM size is the amount of memory available to compose images. This space is used for
fonts, graphics, and other information.
Free RAM size is the amount of memory left over after page RAM is reserved.
The last four lines of this section contain version numbers for printer hardware and software.
In the event of problems, your service representative may ask for these version numbers to
help troubleshoot the printer.
