A SERVICE OF

logo

Removal and Installation
8-23
HP DesignJets 1050C and 1055CM Printers Service Manual
Tail Deflectors and Rear Platen
Refer to Figure 21.
Removal
WARNING Switch off the printer and remove the power cord.
1. Remove the three Deflectors (item 1) by unclipping them from the
Rear Platen (Item 3).
2. Remove two T-10 screws (item 2) on the left and right of the Rear
Platen (item 3) and remove the platen.
Figure 21: Tail Deflectors and Rear Platen
C607401
1
2
2
3