3.
Figure 4
4.
Figures 5–6
Note: The two inner screws of the four-screw
set on either side of the disc are for adjust-
ing the alignment of the upper guard with
the lower guard. The outer screws join the
guards together.
Figure 2.
Figure 3.
Figure 4.
Installation
Tools Needed Qty
Note: Go to Grizzly.com or call Customer Service
at (800) 523-4777 to order the following tools:
H0886—Bi-Metal Hole Saw 1
3
⁄8"
H0904—Hole Saw Arbor
5
⁄8"
T20680—Irwin 3-Pc. Tap Set #10-24
H2717—2-Pc. Mini Tap Handle Set
To install the dust port onto the sander:
1.
2.
Figures 2–3
