Model G0740 (Mfg. Since 11/12)
-19-
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box 1: (Figure 11) Qty
A. Steady Rest Assembly (Installed) .............. 1
B. 10" Faceplate w/D1-5 Camlock Stud Set ... 1
C. 10" 4-Jaw Chuck w/Reversible Jaws.......... 1
D. 3-Jaw Chuck Key ....................................... 1
E. 4-Jaw Chuck Key ....................................... 1
F. Follow Rest Assembly (Installed) ............... 1
Tool Box Inventory: (Figure 12) Qty
G. Tool Box...................................................... 1
H. Open End Wrench 22/24mm ...................... 1
I. Open End Wrench 14/17mm ...................... 1
J. Open End Wrench 10/12mm ...................... 1
K. Phillips Screwdriver #2 ............................... 1
L. Standard Screwdriver #2 ............................ 1
M. Hex Wrench 8mm ....................................... 1
N. Tapered Spindle Sleeve MT#5-#3 .............. 1
O. Dead Center MT#3 ..................................... 1
P. Carbide-Tipped Dead Center MT#3 ........... 1
Q. Camlock Key D1-5 ...................................... 1
R. Tool Post T-Wrench (Clamped on Tool
Post) ........................................................... 1
S. Hex Wrench Set 1.5-10mm ........................ 1
T. Carriage Handwheel Handle ...................... 1
U. Cross Slide Handwheel Handle ................. 1
V. Cast Iron Leveling Pads ............................. 6
Pre-Installed (Not Shown) Qty
• 8" 3-Jaw Chuck w/2-Pc. Jaw Set ............... 1
• 8
1
⁄4" Back Plate D1-5 .................................. 1
Figure 11. Main inventory.
A B
C
D
E
F
Figure 12. Toolbox inventory.
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
