Model G0740 (Mfg. Since 11/12)
-9-
The information contained herein is deemed accurate as of 11/9/2012 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3Model G0740
Main Specifications:
Operation Info
Swing Over Bed.................................................................................................................................... 14.17 in.
Distance Between Centers........................................................................................................................ 40 in.
Swing Over Cross Slide.......................................................................................................................... 8.66 in.
Swing Over Saddle............................................................................................................................... 13.75 in.
Swing Over Gap................................................................................................................................... 20.94 in.
Maximum Tool Bit Size........................................................................................................................... 0.75 in.
Compound Travel........................................................................................................................................ 4 in.
Carriage Travel....................................................................................................................................... 36.5 in.
Cross Slide Travel....................................................................................................................................... 7 in.
Headstock Info
Spindle Bore......................................................................................................................................... 1.653 in.
Spindle Taper............................................................................................................................................ MT#5
Number of Spindle Speeds............................................................................................................................. 16
Spindle Speeds......................................................................................................................... 50 – 2570 RPM
Spindle Type................................................................................................................................ D1-5 Camlock
Spindle Bearings................................................................................................................ NTN Tapered Roller
Spindle Length...................................................................................................................................... 20.87 in.
Spindle Length with 3-Jaw Chuck......................................................................................................... 28.74 in.
Spindle Length with 4-Jaw Chuck......................................................................................................... 30.71 in.
Tailstock Info
Tailstock Quill Travel............................................................................................................................. 4-3/8 in.
Tailstock Taper.......................................................................................................................................... MT#3
Tailstock Barrel Diameter..................................................................................................................... 1.968 in.
Threading Info
Number of Longitudinal Feeds....................................................................................................................... 17
Range of Longitudinal Feeds................................................................................................... 0.002 – 0.067 in.
Number of Cross Feeds................................................................................................................................. 17
Range of Cross Feeds............................................................................................................. 0.001 – 0.034 in.
Number of Inch Threads................................................................................................................................. 45
Range of Inch Threads...................................................................................................................... 2 – 72 TPI
Number of Metric Threads.............................................................................................................................. 39
Range of Metric Threads................................................................................................................ 0.2 – 14 mm
Number of Modular Pitches............................................................................................................................ 18
Range of Modular Pitches.............................................................................................................. 0.3 – 3.5 MP
Number of Diametral Pitches.......................................................................................................................... 21
Range of Diametral Pitches................................................................................................................ 8 – 44 DP
Dimensions
Bed Width.................................................................................................................................................... 9 in.
Leadscrew Diameter.............................................................................................................................. 1-1/8 in.
Leadscrew TPI.................................................................................................................................................. 4
Leadscrew Length..................................................................................................................................... 59 in.
Steady Rest Capacity............................................................................................................... 5/16 – 4-5/16 in.
Follow Rest Capacity.................................................................................................................... 5/8 – 3-1/8 in.
Faceplate Size........................................................................................................................................... 10 in.
Feed Rod Diameter.................................................................................................................................. 3/4 in.
Floor to Center Height......................................................................................................................... 42-5/8 in.
Height With Leveling Jacks................................................................................................................. 54-3/8 in.
Construction
Base..................................................................................................................................................... Cast Iron
Headstock............................................................................................................................................ Cast Iron
Headstock Gears............................................................................................................ Flame Hardened Steel
Bed.................................................................................................. Induction Hardened and Ground Cast Iron
Stand.................................................................................................................................................... Cast Iron
Paint..................................................................................................................................................... Urethane
