Spindle Turning Safety Tips
ON
Adjusting Spindle Speed Page
25
Faceplate Turning
Figure 34
Figure 34.
Mounting Workpiece on Faceplate
1. Spindle
Turning Page 28
Note: Cut off corners of the workpiece to
make it as close to "round" as possible.
Figure 35.
NOTICE
Only use tap screws or wood screws with
non-tapered heads (Figure 35) to attach the
faceplate to the workpiece. Do NOT use dry-
wall screws or screws with tapered heads,
because they can split the faceplate or snap
off during operation.
2.
3.
Headstock/
Faceplate Page 24
