4.
Figure 94
5.
Figure 95
Note: Record the orientation of the oil drain
chute on the inside of the end cap so that you
can properly re-install the cap later.
Spindle Bearing
Preload
Tools Needed Qty
To adjust the spindle bearing preload:
1.
2.
3.
Note: Do not allow any debris to fall into the
headstock when removing the cover.
Tip: Tightly cover the headstock with clean
plastic, such as plastic food wrap, to prevent
foreign objects dropping into the headstock
during this procedure.
Figure 94.
Figure 95.
