Drilling with
Ta il s to ck
To install an MT#3 drilling tool into the
tailstock:
1.
2.
Figures 43–44
Note: If the tapered shaft has a tang, align it
horizontally with the indent in the back of the
quill before inserting it.
Figure 44.
9.
thicker
toward
Figure 41
Move the tailstock toward
the operator half the
distance of the taper.
Looking down from above.
Figure 41.
thinner
away
Figure 42
Move tailstock away from
the operator half the
distance of the taper.
Looking down from above.
Figure 42.
Figure 43.
