1-18 SPARC Enterprise M8000/M9000 Servers Overview Guide • April 2007
Operator Panel Appearance
FIGURE 1-10 shows the operator panel.
Locked
Service
MODE switch
POWER switchCHECK (LED)STANDBY (LED)
POWER (LED)
FIGURE 1-10 Operator Panel
Operator Panel LEDs
TABLE 1-5 lists the operating states indicated by the LEDs on the operator panel.
TABLE 1-5 Operator Panel LEDs
LEDs Name Light color Description of function and operating state
POWER
Green
Indicates whether the main unit power is on.
If this LED is on, the power is on.
STANDBY
Green
Indicates the standby state of the main unit.
If this LED is on, the power can be turned on.
CHECK
Amber
Indicates the main unit operating status. (This is used to
indicate a maintenance target, or it indicates that the unit
cannot be started.)
If this LED is on, a system error has been detected.
