Device Configuration Commands Command Reference
Intelligent Blade Panel Module
166
7.4.9.2 Configuration Commands
7.4.9.2.1 vlan-group
This command is used to create or destroy a vlan port group.
Syntax
vlan-group <vlanGroupName> <1-4094> <uplinkSetName>
no vlan-group <vlanGroupName>
<vlanGroupName> - A string associated with vlan port group as a convenience.
<1-4094> - VLAN ID
<uplinkSetName> - which uplink set to be the external connection for this vlan port group.
no - This command disable linkstate for an existing vlan port group.
Default Setting
None
Command Mode
Global Config
This command is used to add/remove a port to/from vlan port group.
Syntax
vlan-group <vlanGroupName>
no vlan-group <vlanGroupName>
<vlanGroupName> - A string associated with vlan port group as a convenience.
no - This command remove a port from the specified vlan port group.
Default Setting
None
Command Mode
Interface Config
This command is used to set the native VLAN option for a specific VLAN port group.
Syntax
vlan-group-nativeVLAN <vlanGroupName>
no vlan-group-nativeVLAN <vlanGroupName>
