A SERVICE OF

logo

Open as PDF
next previous
16
■ Inserting and taking out a CD-ROM disk
● Inserting a CD-ROM
1
Press the EJECT button.
The CD-ROM tray extends from the drive.
2
With the label side of the CD-ROM disk facing up,
place the CD-ROM disk on the tray at the center.
3
Press the EJECT button.
The tray retracts into the drive, and the CD-ROM is set.
Note the following
When the CD-ROM is set, the BUSY lamp lights. After making sure that the BUSY lamp is put
off, go to the next step.
● Taking out a CD-ROM
To take out a CD-ROM from the drive, first make sure that the BUSY lamp is off, then press the
EJECT button.
EJECT button
04Carrol(7-18) 17/06/2000, 13:4916