9
This section explains how to switch off the power for your PC.
Note the following
- Before switching off the power, exit all applications and save all necessary data.
- Before switching off the power, make sure that the access indicator LEDs of the floppy and hard
disk drives are off. If the power is switched off when the access indicator LEDs are on, new data
may be lost and previously saved disk data may be damaged.
- If the power cord is disconnected from the outlet or a power failure occurs while the PC is on,
just re-connect the power cord or wait until AC power recovers. You need not press the power
switch. When the power becomes on, the PC starts automatically.
- If the PC hangs, or "Power Button Behavior" in "Power" BIOS setting is set to Sleep/Wake, the
power can be switched off by holding down the power switch for at least four seconds. In this
case, it becomes impossible for other means (such as by LAN) to switch on the power.
■ Switching off the power via Windows 95/98
(on Windows 95/98 models)
This section explains how to switch off the power for the PC via Windows 98.
1
Click [Start].
The "Start" menu appears.
2 Click [Shut Down].
The following dialog box appears.
3
Select "Shut down the computer?" and click [Yes].
The power is switched off automatically.
2 Switching off
04Carrol(7-18) 17/06/2000, 13:499
