Confidential
EPSON
TITLE
SHEET
REVISION
NO
SHEETNEXT
24 23
TM-T81
Specification
(STANDARD)
A
The commands listed below in the first column are defined as “obsolete commands” in the ESC/POS
®
command system. This printer supports both upward-compatible commands and obsolete
commands. However, the upward-compatible commands are recommended for use.
Obsolete command Upward-compatible command
ESC i Partial cut (one point left uncut) GS V
ESC m Partial cut (three points left uncut) GS V
ESC u Transmit peripheral device status GS r
ESC v Transmit paper sensor status GS r
FS p Print NV bit image GS ( L <Function 69>
FS q Define NV bit image GS ( L <Function 67>
GS v 0 Print raster bit image GS ( L <Function 112 + 50>
NOTE: “Obsolete commands” are commands that are supported by legacy models; however it is
recommended to replace them with upward-compatible commands, because they will not be
supported in the future products.
