A SERVICE OF

logo

When printing on envelopes and heavy paper, you need to
adjust the paper thickness lever to compensate for the extra
paper weight.
1. Make sure the printer is turned on. Then press the
Pause
button and open the cover.
2. While holding down the
Alt
button, press the
Font
button.
The carriage moves to the lever-adjusting position. Paper
loaded in the printer is ejected when you adjust this lever.
3. Turn the paper thickness lever clockwise as far as it will go.
4. Press the
Alt
button. Then press
Pause
.
5. If you are printing onto envelopes, remove the rear edge
guide from the input tray and reinstall it as shown.
Paper Handling
3-5