c
Caution:
Turn off any virus protection programs before you install
printer software. You do this by holding down the Shift key
while you restart your Macintosh. After installation, you can
use the protection programs again.
Before you begin installation, make a backup of the EPSON
Macintosh printer disk. Then do the following:
1. Turn on your Macintosh and insert the EPSON Macintosh
driver diskette into a diskette drive.
2. Double-click the Installer icon. When you see the initial
screen, click OK to continue and bring up the following
screen:
3. Choose what software components to install as described
below:
The Serial and Network Driver Packages contain all the
software components needed for the serial or LocalTalk
interface. Normally you should choose the Serial Driver
Package if you’re using the serial interface, or the Network
Driver Package if you’re using LocalTalk. This ensures you
have all the software you need to use the printer.
1-14
Setting Up the Printer
