6. Appendix
1. Product Specifications
1.1) Printing Specifications
1.2) Auto Cutter
1.3) Paper Roll Supply Device
1. Printing method: Thermal line printing
2. Dot density: 203 dpi 203 dpi.
3. Printing direction: Unidirectional with friction feed
4. Printing width: 72 mm (2.83"), 576 dot positions
5. Characters per line (default): Font A: 48, English Font B: 24, Chinese
6. Character spacing (default): FontA: 0.25 mm (.01") (2 dots)
7. Printing speed:
8. High speed mode: 160 mm/second, maximum (at 24V, 20C
(68F), Density level 2. Speeds are switched
automatically depending on the voltage
applied to the printer and head
temperature conditions.)
NOTE: There may be variations in printing after switching the mode of the
printing speed. To prevent this for logo printing with ESC command,
using a downloaded bit image is recommended. Change in printing
speed does not occur during down loaded bit image printing. Printing
speed may be slower depending on the data transmission speed and
the combination of control commands. Low transmission speed may
cause intermittent printing. It is recommended to transmit data to the
printer as quickly as possible.
1. Partial cut: Cutting with one point left uncut
1. Supply method: Drop-in paper roll
NOTE: To prevent dot displacement, after cutting, paper must be fed
approximately 1 mm (14/360 inches) or more before printing.
1.4) Paper Specification
1.5) Internal Buffer
1.6) Electrical Characteristics
1. Paper type: Specified thermal paper
2. Form: Paper roll
3. Paper width: 79.5 0.5 mm (3.13" 0.02")
4. Paper roll size: Roll diameter: Maximum 83 mm
5. Specified paper: Specified thermal roll paper;
NTP080-80
Original paper: PD 160R
(Oji Paper Mfg. Co. Ltd.)
Original paper: AF50KS-E
(Jujo Thermal Oy (Finland))
Original paper: P350 (F380), P310, P300
6. Paper roll spool diameter: Inside: 12 mm (.47")
Outside: 18 mm (.71")
1. Receive buffer useable 20K bytes.
2. User-defined buffer (both for user-defined characters and user-defined bit
images): 12K bytes
1. Supply voltage: +24 VDC 8% (optional power supply)
2. Current consumption (at 24V): High speed mode:
Mean: Approximately 1.8A(Character font
A -N, capital letters, 36-character rolling
pattern, 42 columns printing)
Peak: Approximately 8A
Low power consumption mode:
Mean: Approximately 1.2A
Peak: Approximately 6.6A Standby:
Mean: Approximately 0.2A
NOTE:
NOTE:
Paper must not be pasted to the paper roll spool.
Maximum 1A for drawer kick-out driving.
-17-
-16-
