17
Basic Operations
Procedure
1
Press the [Menu] button on the remote
control, and then select Aspect Ratio
from the Video menu.
For details on this operation, refer to “Using the
Configuration Menus.” (p.29)
2
Press the [ ] and [ ] buttons to set the
aspect ratio to either 4:3 or 16:9, and
then press the [Enter] button.
3
After making the adjustment, press the [Menu] button to exit the configuration
menu.
Automatic setup detects the status of the signals coming from the connected computer and automatically
adjusts these signals so the optimum image quality can be obtained. Automatic setup involves adjustment of
the following three items: Tracking
, Position and Sync .
Adjusting Computer Images
Automatic Setup
•
If Auto Setup in the Video menu is set to OFF (the default setting is ON), automatic setup is not
carried out. If you press the [Auto] button on the remote control while computer signals are
being projected, adjustment will then be carried out.
•
If you press the [Auto] button while the E-Zoom or Freeze function is being used, or while a
configuration menu or help menu is being displayed, the function will be cancelled when you
press the [Auto] button, and then the adjustment will be carried out.
•
Sometimes the signals may not be adjusted correctly, depending on the type of signals being
output by the computer. In such cases, use the configuration menu commands to adjust the
tracking and sync settings manually. (p.18, 19)
: Return : Select
/
Video Signal
Color Mode
Select [Theatre ]
Video
Audio
Setting
Advanced
About
Position
Adjust
Brightness
Contrast
0
0
Color 0
Tint
Sharpness 0
Aspect Ratio
Reset
Execute
Reset All
+
-
+
-
0
+
-
Select [Auto ]
4: 316: 9
+
-
+
-
:
:
:
:
:
:
: Set
EPSON Cinema Filter :
ON OFF
: Return : Select
/
Video Signal
Color Mode
Select [Theatre ]
Video
Audio
Setting
Advanced
About
Position
Adjust
Brightness
Contrast
0
0
Color 0
Tint
Sharpness 0
Aspect Ratio
Reset
Execute
Reset All
+
-
+
-
0
+
-
Select [Auto ]
4: 3 16: 9
+
-
+
-
:
:
:
:
:
:
: Set
EPSON Cinema Filter :
ON OFF
ESCAuto
Enter
Remote control
