ESC 97 61 a
ESC 98 62 b
ESC 101 65 e
ESC Dec Hex Symbol
Function
ESC 94 5E
A
Turns
nine-pin
graphics ON.
Format:
ESC “*” d n
l
nz
followed by 2 times n data numbers,
where
n = total number of dot columns,
nl
= n MOD 256,
n2
= INT (n/256).
The printer expects two data num-
bers for each column of print. The d
selects the density, where 0 produces
single-density and 1 produces double-
density.
Sets justification format in NLQ
mode. Format:
ESC “a” n
where n=0 for left justification; n=1
for centering; n=2 for right justifica-
tion; and n=3 for full justification.
Sets up to 16 vertical tabs for channel
n. Format:
ESC “b” n n
l
n
2
. . .
nk
0
where n = 0-7, and n = 0 is the same
as ESC “B”. Terminate this tab se-
quence with 0 or a number less than
the last defined tab
(nk).
Sets horizontal and vertical tab incre-
ments.
Horizontal format:
ESC
“e0”
n
where n is the number of spaces and
equals :
0-21 in pica
0-25 in elite
0-36 in compressed.
Vertical format:
ESC “e1” n
where n is the number of line feeds
and equals :
INT (255/x) for x/216-inch line spac-
ing, INT (85/x) for x/72-inch line
spacing, 7 for 12-dot line spacing.
B-9
