1
Setting Up the Scanner
1-13
CRESSON
Rev. C
A5 size CHAP1.fm
2/16/99 Pass 0
R
Proof Sign-off:
M. Fujimori _______
<leadername> _______
<editorname> _______
If you add the scanner to a system in which one of your SCSI
devices already has a SCSI ID of 2, change the scanner ID number
to an unused number using the rotary switch. See the table below
as a guide.
c
Caution:
Do not set the SCSI ID to an ID number that is already assigned
to another device otherwise the computer, scanner, and other
devices will not operate properly.
ID Availability Description
0 Not available for Macintosh Used for hard disk
Not recommended for
Windows
Usually used for hard disk
1 Not recommended Usually used for hard disk
2 Factory setting of the scanner
3 Not available if your Macintosh
has a built-in CD-ROM
4
5
6
7 Not available for Macintosh Always used for the Macintosh
itself
May not be available for
Windows
Usually used for the SCSI board
✽
Not available Never selected
*
Use only to prepare the scanner
for transportation. See
"Transporting the Scanner and the
Transparency Unit" on page 4-4.
* Scanner will not work if selected.
