Preparing the Projector to Present Through a Network 85
Using Wireless Security Options
If you have installed the optional wireless LAN module (G5150NL
and G5350NL only), you can use the following security options when
connecting to the projector wirelessly: WEP encryption, WPA
security, EAP-TLS certificate validation, or LEAP, EAP, or PEAP
authentication. To set these security features on your wireless
network, see your documentation or get help from your network
administrator. See the following sections to enable the security option
on your projector:
■ “Enabling WEP Encryption” below
■ “Enabling WPA Security” on page 87
■ “Enabling EAP, LEAP, or PEAP Authentication” on page 88
■ “Enabling EAP-TLS Certificate Validation” on page 89
Enabling WEP Encryption
1. Press Menu on the remote control, then highlight Network and
press
Enter.
2. Choose
Network Configuration and press Enter.
3. Highlight
Security and press Enter. Then press Enter again to
display the security options:
4. Highlight
WEP and press Enter.
