Preparing the Projector to Present Through a Network 63
You see this screen:
4. Make sure
Quick is selected for the Connection mode. If not, use
the pointer button on the remote control to highlight
Quick,
then press
Enter to select it.
5. If your network is using 802.11a, use the pointer button on
the remote control to highlight
802.11a, then press Enter to
select it.
6. If your computer’s network card supports an SSID (or ESSID)
name (see page 67), highlight the
SSID text box, press Enter, and
enter a name.
Press the pointer button to select individual letters; then press
Enter to input a character. To add a blank space or to navigate
backward and forward through the input text, highlight the
arrows and press
Enter. To toggle symbol settings or capital
letters, highlight the option and press
Enter. When you’re done,
highlight
Finish and press Enter.
note
If you are using a
WPS-compatible access
point, see page 79 for
connection information.
