65
R4CB860
html.bk Rev. F
SPC.FM A5 size
10/19/04
R
Proof Sign-off:
KOW N.Mizuno H.Tomizawa
T.Takahashi
NOC K. Lee
For EPSON STYLUS PHOTO RX500/600 and
EPSON STYLUS CX4600/6400/6600 Users
For Windows
Configuring the network interface
Configure the network interface for use on the TCP/IP network,
and install the drivers and the utility for the all-in-one on your
computer.
Make sure the all-in-one is set up and the software for the
all-in-one is installed on your computer before taking the steps
below. See the manual shipped with the all-in-one for detailed
instructions.
Note:
❏ If EpsonNet WinAssist is installed on your computer, uninstall it
before following the steps below.
❏ It is a good idea to write down the SSID and WEP Key or WPA
Personal password before taking the steps below.
❏ Windows Server 2003 does not support this function.
1. Insert the Software CD-ROM in the CD-ROM drive.
If the Installer dialog box does not appear automatically,
double-click EPSETUP.EXE on the CD-ROM.
