A SERVICE OF

logo

Open as PDF
next previous
CONFIDENTIAL
Paper roll Miscellaneous commands ESC ( A
Ver. 10.01 p. 407
[Notes]
■ This function repeats integrated beeper control of [(
t1
× 100 ms) beep/ (
t2
× 100 ms) stop] when offline
factors have occurred. However, when (
t1
= 255) continuous beeping occurs.
■ If roll paper detector is selected to stop printing when there is no paper, when the detector detects no roll
paper and goes offline, the setting of this function is disabled.
■ When there is no roll paper, the integrated beeper can be stopped by any of the following:
• Clear the factor.
• Press FEED switch.
• Offline factor specified by Function 98 occurs.
• Process the [integrated beeper stop (
c
= 0)] in this function.
• Reset or turn off power.
■ Setting of this function is enabled until reset or power off.