iv
L
R4C4860
Startup Guide Rev. C
FRONT.FM A5 size
11/20/00
Proof Sign-off:
DAI K.A. Kobayashi T. Morita
K. Nishi
DAI K. Ramsey
To use your printer with a Macintosh
To use this printer, your Apple
®
Macintosh
®
must meet the
following system requirements. You also need a USB cable to
connect this printer to Apple Macintosh computers.
*1 is for graphic data use
*2 is for line data use
Note:
❏ The amount of available memory varies according to the number and
kind of applications that are open. To see how much memory is
available, choose About This Macintosh
from the Apple menu and
refer to the memory size (listed in kilobytes) under “Largest Unused
Block” (1,024 K = 1 MB).
❏ The memory requirements above are for printing on B0 (1030 ×
1456 mm) size paper. These requirements may vary depending on
the size of the paper, the type of application you are using, and the
complexity of the document you want to print.
❏ The available interface varies according to Macintosh system
version as follows.
Network interface: 7.6.1 to 9.x
USB interface: 8.1 to 9.x
IEEE 1394 interface: 8.6.x to 9.x
In addition to these system and memory requirements, you also
need 15 MB of free hard disk space to install your printer software.
Minimum system Recommended system
PowerPC PowerPC G4 400 MHz or higher
processor
System 7.6.1 Mac OS 8.1 or later
11 MB of available memory
14 MB of available memory when
background printing is turned on.
33 MB or more of available memory
56 MB of available memory when
background printing is turned on.
- 500 MB*
1
/300 MB*
2
or more free
disk space (B0)
