Installing and Configuring the Software for Macintosh 35
Installing and Configuring the
Software for Macintosh
This chapter explains how to install the software and configure the print server for
your Macintosh. It also explains how to set up additional Macintosh computers to
use the printer on a wireless network.
Before you begin, you need to make sure that your AirPort adapters are installed
and ready. If you have an existing network operating in infrastructure mode, you
need to verify that your AirPort base station is operating correctly and linked to
your computers. If you need instructions, see the documentation or help files that
came with your equipment.
Then follow the instructions in these sections:
■ Checking your wireless settings to make sure you’re ready
■ Installing the C84WN software
■ Configuring the print server
■ Adding the printer to Print Center (Macintosh X OS 10.1 to 10.2) or the
Printer Setup Utility (Macintosh X OS 10.3), or selecting it in the Chooser
(Macintosh OS 8.6 to 9.x)
■ Setting up additional Macintosh computers
