A SERVICE OF

logo

Test Prints
The test prints do not print.
The paper does not feed at all.
l You may not have set the correct INPUT paper path with
SelecType. See Chapter 3.
l After entering the TEST PRINT option in SelecType Level 2,
you may not have pressed long enough to initiate the
TEST PRINT. Try running the test again. This time, however,
hold down until the display begins to flash.
The paper feeds but nothing is printed.
l The imaging cartridge may need to be replaced. Replace it as
described in Chapter 5.
l If the test print still does not print, contact your dealer for
assistance.
6-22 Troubleshooting