Epson DLQ-3000+ Manual

A SERVICE OF

next previous

2. Select

Overlapping Form

mode using SelecType 2.

c

Caution:

❑

Printing on the edge of overlapping multi-part forms

can damage the print head.

❑

Be sure to select

Overlapping Form

mode when

using this type of paper; otherwise your printer may

be damaged.

3. Follow the instructions in “Loading continuous paper with

the tractor” on page 3-14.

To tear off and eject overlapping multi-part forms

Always tear off and eject overlapping multi-part forms

according to the procedure below.

Note:

In

Overlapping Form

mode, the

Tear Off

button is disabled and

the

Load/Eject

button only feeds forms forward.

1. At the back of your printer, tear off the last overlapping

multi-part form that has entered the printer.

2. Press the

LF/FF

button to eject the last overlapping multi-part

forms forward.

L

Maple Rev.D

A5 size Chapter 3

97/06/17 pass 0

3-30

Paper Handling