8 Installing and Using the Remote Configuration Manager
Installing and Using the Remote Configuration
Manager
The Epson Remote Configuration Manager provides an easy way to change your
printer’s default settings in Windows. Follow these steps to install it:
1. Select
Install EPSON Remote Configuration Manager on the Installation
screen and click .
2. When you see the InstallShield window, click
Yes. You see this screen:
3. Click
Next and follow the on-screen instructions.
4. When the installation is complete, click
Finish. (You may need to close a
window on your screen to see the final installation screen.)
To start the program, select
Programs (or All Programs) > Epson Remote
Configuration Mgr > Epson Remote Configuration Manager
.
To open the program’s on-screen
User’s Guide
, select
Programs
(or
All
Programs
)
> Epson Remote Configuration Mgr > Epson Remote Configuration
Manager User’s Guide
.
Note:
If you are using the serial port, you need to switch the printer driver to COM2 before
you run the Remote Configuration Manager. Switch it back to COM1 when you’re
done.
