Changing Paper 15
English
Changing Paper
Follow the steps here when you need to change the paper loaded on the front or
rear tractor.
1. To tear off any printed pages or excess paper, press the
Tear Off button and
tear off the pages at the perforation.
c
Caution:
❏ Always tear off the printed document and any excess paper before
changing paper. If the perforation does not align with the tear-off edge,
you can adjust it. See “Adjusting the Tear-Off Position” in your
on-screen Reference Guide.
❏ To safely remove labels, continuous forms with labels, or overlapping
multi-part forms before changing paper, tear off the fresh supply below
the tractor and press
LF/FF Load to eject the remaining labels or forms.
2. Press the
Front/Rear button to switch to the other tractor. The selected
paper advances to the top-of-form position.
3. Open the front cover or the back cover and the back flap.
4. Open the sprocket covers and remove the paper from the tractor.
5. Load the new paper. See “Loading Paper On the Front Tractor” on page 9
or “Loading Paper On the Rear Tractor” on page 12 for instructions.
sprocket cover
