SelecType Options
L-OFFSET
0
-64
to +63
Use the L-OFFSET (left offset) option to make fine adjustments in the
position of the printing on the page. The setting is in dots; each dot is
1/300th of an inch (0.0846 mm). With this option, you can move the
printing on the page approximately 1/5th of an inch (5 mm) to the left
(settings from -1 to -64) or to the right (settings from 1 to +63). The
factory setting is 0.
MEMORY LEFT
K
This option displays the amount of memory (in kilobytes) available.
You can use this information to see whether a newly-installed
memory option is working correctly or to see
how
much memory
you
have
available for fonts or complex graphics.
LOAD MACRO
0
0 to 4
Use this option to load one of the macros you’ve created using the
SAVE MACRO option. The factory setting is 0. When you press
,
the following appears on the display:
Press or to
choose
the number of the macro you want to use.
Then press to load the selected macro. Whenever you select
macro 0, all Level 1 settings return to their factory settings. Press
to exit this submenu without loading a macro.
4-18
SelecType
