The HBAnyware Utility User Manual Page 133
InitiateAuth
Supported by: Windows, Solaris LPFC, Solaris emlxs (SFS) and Linux.
Syntax: hbacmd InitiateAuth <WWPN1> <WWPN2>
Description: Initiates the authentication configuration on the HBA.
Parameters:
WWPN1 - World Wide Port Name of the HBA whose authentication configuration you wish to initiate.
WWPN2 - Must be ff:ff:ff:ff:ff:ff:ff:ff
PCIData
Supported by: Windows, Solaris LPFC, Solaris emlxs (SFS) and Linux.
Syntax: hbacmd PCIData <WWPN>
Description: Shows PCI configuration data for the HBA.
Parameters:
WWPN - World Wide Port Name of the HBA whose configuration data you wish to view.
Wakeup
Supported by: Windows, Solaris LPFC, Solaris emlxs (SFS) and Linux.
Syntax: hbacmd Wakeup <WWPN>
Description: Shows wakeup parameter data for the HBA.
Parameters:
WWPN - World Wide Port Name of the HBA whose wakeup parameter data you wish to view.
LoopMap
Supported by: Windows, Solaris LPFC, Solaris emlxs (SFS) and Linux.
Syntax: hbacmd LoopMap <WWPN>
Description: Shows the arbitrated loop map data for the HBA.
Parameters:
WWPN - World Wide Port Name of the HBA whose arbitrated loop map data you wish to view.
GetBeacon
Supported by: Windows, Solaris LPFC, Solaris emlxs (SFS) and Linux.
Syntax: hbacmd GetBeacon <WWPN>
Description: Shows the current beacon status for the HBA.
Parameters:
WWPN - World Wide Port Name of the HBA whose current beacon you wish to view.
