101
Network Communication operation and change of state
Network Communication can be used under the environment which one or more computers are con-
nected to the projector via the network.
Preparation
Start up the Network Capture 4 software on the subject computer. Set standby the projector or turn it
on. Check IP address of the subject computer is registered in the connection list (+p.95).
Operation on the Main PC Operation on the Sub PC
On the Communication
z
Executing the command "Start Communication".
➔ The capture editing window appears on the
screen.
Frame
z
Executing the command "Start Communication".
Execute the command "Start Editing" on the task
bar.
➔ The capture image on the Main PC
appears on the screen.
Frame
R B
x
Editing the capture image.
➔ The editing information is automatically
transferred to the Sub PC.
R
➔ The editing information on the Main PC is
reflected on the Sub PC.
B
c Releasing the editing authority.
➔ The color of authority status frame changes green.
G
➔ The color of authority status frame chang-
es green.
G
➔ The color of authority status frame changes blue.
B
x Acquiring the authority.
➔ The color of authority status frame chang-
es red.
R
➔ The editing information on the Sub PC is
reflected on the Main PC.
B
c Editing the captured image using with the
tools.
➔ The editing information is automatically
transferred to the subject PC.
R
➔ The color of authority status frame changes green.
G
v Releasing the editing authority.
➔ The color of authority status frame chang-
es green.
G
v Acquiring the authority.
➔ The color of authority status frame changes red.
R
➔ The color of authority status frame chang-
es blue.
B
b Repeat steps x, c if required.
b Repeat steps x to v if required.
n Executing the command "Capture transfer" on
the task bar.
➔ Updating the editing window with a new
captured screen image.
R
➔ A new captured screen image appears on
the editing window.
B
m Repeat steps x to b.
, Ending the communication.
➔ The capture editing window disappears.
R
➔ The capture editing window disappears.
✐ The projector projects the edited captured image on the screen when the input mode of the projector is
set "Network".
✐ The command "Save Communication" can be executed in any of the mode even if the PC does not have
the authority.
✐ The arrow (➔) shows a response to the command executed.
✐ The execution of the command "Terminate Communication" or "End Editing" on the Sub PC has no effect
on the other subject computers.
Network Communication operation and change of state
