30
Computer Input
Press the Point 7 8
buttons to adjust value.
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
frame pointer to the Image Adjust Menu icon.
1
2
Press the Point d button to move the red frame
pointer to the item that you want to adjust, and then
press the SELECT button. The level of each item is
displayed. Adjust each level by pressing the Point 7 8
buttons.
Move the red frame pointer
to the item to be selected
and then press the SELECT
button.
Image Adjust Menu
Press the Point 7 button to decrease contrast and the Point
8 button to increase contrast. (From 0 to 63.)
Press the Point 7 button to adjust image darker and the
Point 8 button to adjust image brighter. (From 0 to 63.)
Contrast
Brightness
Press the Point 7 8 buttons to obtain better balance of
contrast. (From 0 to 15.)
Gamma
Image Level Menu
Move the red frame pointer
to any of Image 1 to 4
where you want to set and
then press the SELECT
button.
Store icon
Press the SELECT button
at this icon to store the
adjustment.
Image Adjust Menu icon
Press the Point 7 button to lighten red tone and the Point
8 button to deepen red tone. (From 0 to 63.)
White balance (Red)
Press the Point 7 button to lighten green tone and the
Point 8 button to deepen green tone. (From 0 to 63.)
White balance (Green)
Press the Point 7 button to lighten blue tone and the Point
8 button to deepen blue tone. (From 0 to 63.)
White balance (Blue)
Press the Point 7 8 buttons for Color temp. level that you
want to select. (XLow, Low, Mid, or High)
Color temp.
Press the Point 7 button to soften the image and the Point
8 button to sharpen the image. (From 0 to 15.)
Sharpness
Image Level Adjustment
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box will appear and then
select [Yes]. All adjustments will return to their previous
figures.
Reset
Store
Exit the Image Adjust Menu.
Quit
To store the image data adjusted manually, move the red
frame pointer to the Store icon and press the SELECT
button. The Image Level Menu will appear. Move the red
frame pointer to the Image 1 to 4 where you want to set
and then press the SELECT button.
The confirmation
box will appear,
then select [Yes].
Store item
Press the SELECT button
at this item to store the
adjusted data.
✔
Note:
•
After adjusting any of the White balance Red,
Green or Blue, the Color temp. will change
to "Adj.".
