Cables used for connection
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
• USB Cable ✽
• Audio Cables (Mini Plug: stereo) ✽
(✽ = Not supplied with this projector.)
External Audio Equipment
VGA cable
USB cable ✽
Audio cable (stereo) ✽
Audio cable ✽
(stereo)
Monitor Output
USB port
Audio Output
COMPUTER IN 1/ COMPONENT IN
(or COMPUTER IN 2/ MONITOR OUT)
USB
COMPUTER/ COMPONENT
AUDIO IN
AUDIO OUT
(stereo)
Audio Input
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output. (See Page 41.)
VGA cable ✽
Monitor Input
COMPUTER IN 2/ MONITOR OUT
Note:
When connecting the cable, the power cords of both the projector
and the external equipment should be disconnected from AC
outlet.
✔
Note:
• If you wish to use PAGE
ed
buttons on the remote control, connect USB
port of your computer to the USB socket of the projector. (p9 and 42)
• When connecting AUDIO OUT to external audio equipment, the projector's
built-in speaker is disconnected.
• When the cable is
of the longer variety
, it is advisable to use the
COMPUTER IN 1 / COMPONENT IN and not the COMPUTER IN 2 /
MONITOR OUT.
• Input sound to the COMPUTER/COMPONENT AUDIO IN terminal when
using the COMPUTER IN 2/ MONITOR OUT terminal as input.
