40
Video Input
Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or
press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
1
Input Menu
2
Use the Point ed buttons to select Computer 1 and
then press the Point 8 button.
Input Source Selection (Component, RGB Scart 21-pin)
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGA Cable, select Component.
Component
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
RGB (Scart)
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point ed buttons to select Input and
then press the Point 8 or the SELECT button.
✔ Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.47).
Top Control
3
Use the Point ed buttons to select Component or
RGB(Scart) and then press the SELECT button.
INPUT button
Video
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
S-video
Computer 1 ( RGB)
/(Component) / (Scart)
COMPUTER button
Remote Control
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
Computer 1 ( RGB)
/(Component) / (Scart)
