29
Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the
COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
1
Input Menu
2
3
Computer Input
✔ Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.47).
Computer
1
Top Control
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point ed buttons to select Input and
then press the Point
8
or the SELECT button.
INPUT button
Input Source Selection (RGB: Computer 1/Computer 2(Analog))
Video
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
S-video
Computer 1 ( RGB)
/(Component) / (Scart)
COMPUTER button
Remote Control
Use the Point ed buttons to select either Computer
1 or Computer 2 and then press the Point
8
button to
access the submenu items.
When Computer 1 is selected, use the Point ed
buttons to select RGB and then press the SELECT
button.
When Computer 2 is selected, use the Point ed
buttons to select RGB(Analog) and then press the
SELECT button.
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
Computer 1 ( RGB)
/(Component) / (Scart)
