Dell™ PowerEdge™ T610 Technical Guidebook
8
FEATURE DETAILS
Video
Integrated Matrox G200 , 8MB shared video memory
Availability
Hot-Plug Hard Drives, Hot-Plug Power; Memory SDDC, ECC, Control Line Parity,
Optional redundant cooling
Server
Management
Dell™ Embedded Server Management provides IPMI 2.0 compliance
I/O Slots
5 PCIe Gen2
Two full-height, full-length x8 link (slot 2 and 3)
Three full-height, half-length x4 link (slot 1,4 and 5)
Note: All slots support up to 25W, but a maximum of two 25W cards and three
15W cards may be installed at any time, regardless of the slots they are installed in
The storage controller card has a dedicated slot (PCIe x4) apart from the
available 5 PCIe slots
RAID
PERC 6/I, SAS 6iR and PERC 6/E
Embedded NIC
2 x TOE BRCM 5709C (Dual-port Broadcom 5709C Gigabit network controller
with iSCSI hardware key option)
USB
Total: 9 , USB 2.0 compliant
6 in the back, 2 in the front, 1 internal
Power Supplies
Hot-plug redundant PSUs
2 x 570W (Energy Smart PSU ) (or) 2 x 870W (High Output PSU)
Voltage is 90–264 VAC, auto ranging, 47-63Hz
Heat dissipation – 2968.6 BTU/hr maximum (High Output), 1944.9 BTU/hr
maximum (Energy Smart)
Maximum inrush current – May reach 55A per power supply for 10ms or less
Front Panel
The system control panel is located on the front of the system chassis to
provide user access to buttons, display, and I/O interfaces
LCD on front panel for error messaging
System ID
System ID switch with LED indicator at rear side and LCD indication at
front side
128x20 pixel LCD with controls on front panel for system ID and error messaging
LCD panel allows orientation for tower or rack horizontal screen view
System ID for the PowerEdge T610 is 0x0237
Fans
Optional Redundant Cooling. (Rear cooling fans with redundancy option)
Chassis
Tower or 5U rack mount
