Dell™ PowerEdge™ T610 Technical Guidebook
22
Stressed Processor: An operating mode per ISO7779 (1999) definition 3.1.6; SPECPower set to 50%
loading is used.
LwA-UL: The upper limit sound power level (LwA) calculated per section 4.4.2 of ISO 9296 (1988) and
measured in accordance with ISO7779 (1999).
LpA: The average bystander position A‑weighted sound pressure level calculated per section 4.3 of
ISO9296 (1988) and measured in accordance with ISO7779 (1999). The system is placed on
the floor.
Tones: Criteria of D.5 and D.8 of ECMA‑74 9th ed. (2005) are followed to determine if discrete tones are
prominent. The system is placed in center of ISO7779 table and acoustic transducer is at front
operator position, ref ISO7779 (1999) Section 8.6.1, Position P4.
The PowerEdge T610 motherboard dimensions are 17.25" x 15". The following figure shows the main
components on the PowerEdge T610 planar:
Figure: PowerEdge T610 Main Components
Section 5. Block Diagram
The PowerEdge T610 electrical system consists of the planar subsystem with TPM, iDRAC6 Enterprise,
and iSCSI key options, PDB and power supply subsystem, control panel, SAS backplane, and storage
(PERC6/i or SAS6/iR) card. The features and functions of these electrical subsystems are detailed below.
