Configuring IPv6 613
Configuring OSPFv3 Route Redistribution using the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• OSPFv3 Commands
OSPFv3 Route Redistribution Summary
Use the OSPFv3 Route Redistribution Summary
page to display route redistribution settings by source.
To display the page, click IPv6 > OSPFv3 > Route Redistribution Summary in the tree view.
Figure 10-32. OSPFv3 Route Redistribution Summary
The OSPFv3 Route Redistribution Summary page displays the following fields:
•
Source
— The Source Route to be Redistributed by OSPF.
•
Redistribute
— Specify whether to allow the routes learned through this protocol to be redistributed.
•
Metric
— The Metric of redistributed routes for the given Source Route. Displays nothing when not
configured.
•
Metric Type
— The OSPF metric type of redistributed routes.
•
Tag
— The tag field in routes redistributed. This field displays the tag if the source was pre-configured,
otherwise 0.
Displaying OSPFv3 Route Redistribution Summary using the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• OSPFv3 Commands
