Operations Common to Each Mode
To change
adjustment
setting
1.
Press and hold the [DISP] button for 1
second or longer to switch to the
adjustment selection display.
2.
Press the
[~]
or
[~]
button to select
the
"item name".
"CLOCK"
~
"SETIINGS"
~
"SCRN SVR"
+---+
"MSG INP"
+---+
"SCROLL"
+--+
"DIMMER"
~
"A-CANCEL"
+--+
'TEL-SP"
+---+
"TEL-
SW"
+--+
"S-CHECK"
3.
Press the
[.]
or
[T]
button to select the
"desired
setting
value".
*
In
the case of display blinking "ENT", you
can press the
[~~~
1button
to
adjust the
setting value.
* After completing settings, press the [DISP]
button to return to the previous mode.
• Setting the
clock
2-1. Select "CLOCK".
3-1. Press the
[~~~
] button
3-2. Press the
[~]
or
[~]
button to select the
hour or the minute.
3-3. Press the
[.]
or
[T]
button to set the
correct time.
* The clock
is
displayed
in
12-hour format.
3-4. Press the
[~~~]
button to store the time into
memory.
Note:
•
You
cannot set the
clock
when it is displayed
with only the ignition
on.
If you drain
or
remove
the car's battery
or
take out this unit, the clock is
reset. While setting the clock,
if
another button
or
operation is selected, the clock set mode
is
canceled.
22 DXZ385USB
• Displaying the settings
The
number of indicator of this unit decreases,
you can see the state of current settings at any
operation mode.
2-1. Select
"SETIINGS".
3-1. Press the
[.]
or
[T]
button to display the
state of current settings.
* When the setting
is
selected, after 1 second
the current state will
be
displayed.
For example: after 1 second,
(
i-
rn I
]
[
i-
--
r-,
rI
]
_:r
..
11I
.:r
L
rJ
u
11
or
(
scrJ
OFF
]
• Turning the screen saver
function
on
or
off
This unit is provided with the screen saver
function which allows you to show various kinds
of patterns and characters
in
the operation
status indication area of the display
in
a random
order. You can turn on
or
off this function. If the
button operation is performed with the screen
saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
* The factory default setting is
"ON".
2-1. Select "SCRN SVR".
3-1. Press the
[.]
or
[T]
button to select the
setting.
Each time you press the
[.]
or
[T]
button,
the setting changes
in
the following order:
"MESSAG~+--+"ON"+--+"OFP
