A SERVICE OF

logo

2-11
Cisco SFS 3012R Multifabric Server Switch Hardware Installation Guide
OL-11187-01
Chapter 2 Installing and Booting the Cisco SFS 3012R Server Switch
Connecting InfiniBand Hosts
Figure 2-5 InfiniBand Cable with Pinch Connector
Figure 2-6 InfiniBand Cable with Pull Connector
Note If your host does not provide enough free space around a given InfiniBand port, verify that your
InfiniBand cable connector engages fully. Wiggle your connector back and forth to be sure that both
sides of the connector have locked firmly into place.
To remove a cable with a pinch connector, pinch both sides of the back of the connector, as shown in
Figure 2-7, and pull the connector away from the port.
10
144960
12
144961