Contents
iv
Cisco SFS 3012R Multifabric Server Switch Hardware Installation Guide
OL-11187-01
Power Supply Modules 1-10
Blower Modules 1-11
CHAPTER
2 Installing and Booting the Cisco SFS 3012R Server Switch 2-1
Safety 2-1
Preparing for Installation 2-3
Installing Cisco SFS 3012R Server Switch Components 2-3
Mounting the Cisco SFS 3012R Server Switch on a Rack 2-4
Attaching a Serial Console Cable to a PC or Terminal 2-8
Booting the Cisco SFS 3012R Server Switch and Configuring Basic Connectivity 2-8
Assigning a Static IP Address 2-9
Obtaining an IP Address with DHCP 2-9
Connecting InfiniBand Hosts 2-10
Managing the Cisco SFS 3012R Server Switch 2-12
CHAPTER
3 Installing and Removing Server Switch Field Replaceable Units (FRUs) 3-1
Installing a Controller Module 3-2
Adding or Replacing Ethernet or Fibre Channel Gateways 3-3
Installing an InfiniBand Switch Module 3-4
Removing an InfiniBand Switch Module 3-7
Installing a Power Supply Module 3-7
Removing a Power Supply Module 3-9
Installing a Blower Module 3-9
Removing a Blower Module 3-11
CHAPTER
4 Viewing and Updating the Software Image 4-1
Viewing the Software Image Version 4-1
Viewing the Software Image Version with the CLI 4-2
Viewing the Software Image Version with the Element Manager GUI 4-3
Updating the Software Image 4-4
Updating the Software Image with the CLI 4-5
Updating the Software Image with the Element Manager GUI 4-6
Deleting a Software Image 4-9
Deleting an Image with the CLI 4-9
Deleting an Image with the Element Manager GUI 4-10
