2-47
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Chapter 2 Illustrated Card List for MGX Switches and the MGX 8880 Media Gateway
Front Cards
The PXM1E-8-155 NNI/UNI back cards must be installed in an APS assembly to support APS line
redundancy. See the “APS Assembly” section on page 1-28 for additional information.
Table 2-22 PXM1E Cards, Interfaces, and Supported Back Cards
PXM1E Types of Lines Supported Supported Back Cards
PXM1E-4-155 Up to 4 OC-3c interfaces User interface back card:
• PXM-UI-S3 or PXM-UI-S3/B
NNI/UNI back cards:
• MMF-4-155/C
• SMFIR-4-155/C
• SMFLR-4-155/C
PXM1E-8-155 Up to 8 OC-3c interfaces User interface back card:
• PXM-UI-S3/B
NNI/UNI back cards:
• MCC-8-155
• SFP-8-155
Transceivers for the SFP-8-155:
–
MMF-1-155-SFP
–
SMFIR-1-155-SFP
–
SMFLR-1-155-SFP
PXM1E-8-T3E3 Up to 8 T3/E3 interfaces User interface back card:
• PXM-UI-S3 or PXM-UI-S3/B
NNI/UNI back cards:
• SMB-8E3
• SMB-8T3
PXM1E-16-T1E1 Up to 16 T1/E1 interfaces and up
to 8 IMA groups
User interface back card:
• PXM-UI-S3/B
NNI/UNI back cards:
• MCC-16-E1
• RBBN-16-T1E1
PXM1E-COMBO Up to 4 OC-3c and 8 T3/E3
interfaces
User interface back card:
• PXM-UI-S3 or PXM-UI-S3/B
NNI/UNI back cards:
• T3E3-155
Transceivers:
–
MMF-1-155-SFP
–
SMFIR-1-155-SFP
–
SMFLR-1-155-SFP
