A SERVICE OF

logo

B-36
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Appendix
Illustrated Cable Guide
CAB-MMF-LC
Figure B-8 CAB-MMF-LC (Multimode LC Cable) (72-3742-01)
CAB-MMF-LC-Y
Figure B-9 CAB-MMF-LC-Y (72-3811-01) Cable
CAB-RBBN-16-T1E1
The CAB-RBBN-16-T1E1 cable is used on the RBBN-16-T1E1 back card. You need two cables per back
card, one TX and one RX.
Figure B-10 CAB-RBBN-16-T1E1 Cable
CAB-RBBN-16T1E1-Y Figure B-10 on page B-37
CAB-SMFIR-LC Figure B-11 on page B-38
CAB-SMFIR-LC-Y Figure B-12 on page B-39
CAB-SMFLR-LC Not shown. See Figure B-11 on page B-38
CAB-SMFLR-LC-Y Not shown. See Figure B-12 on page B-39
Table B-31 Location of Cable Illustrations in This Appendix (continued)
Cable Name Cable Location in this Appendix
116369
116423
3618
191
26
1
50
25
101879