Chapter 4 Managing the Cisco SFS 7000P Switch
Managing the System with Element Manager
4-4
Cisco SFS 7000P Hardware Installation Guide
OL-9167-01 Rev. A0
To view the Health Status window, perform the following steps:
Step 1 Launch the Element Manager.
Step 2 Select Health > Status. The Health Status window opens. (See Figure 4-3.)
Figure 4-3 Health Status Window
Using the Summary Tab
Use the Summary tab (See Figure 4-3.) to view the status of the power, fans, and
temperature sensors at once.
The Summary tab has the following fields:
• Power
–
A green check indicates that at least one power source is connected and
functioning properly.
–
A red check indicates that the power supply AC is disconnected.
• Fans
–
A green check indicates that at least one fan is present, and is functioning
properly.
–
A red check indicates a fan failure.
• Sensors
–
A green check indicates that the system temperature is at an acceptable
level.
