A SERVICE OF

logo

5-2
Catalyst 3850 Switch Hardware Installation Guide
OL-26779-02
Chapter 5 Installing the Fan
Fan Module Installation
Figure 5-1 Fan Module
Fan Module Installation
Installation Guidelines
Observe these guidelines when removing or installing a fan module:
Do not force the fan module into the slot. This can damage the pins on the switch if they are not
aligned with the module.
A fan module that is only partially connected can disrupt the system operation.
The switch supports hot swapping of the fan module. You can remove and replace the module
without interrupting normal switch operation.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Installing a Fan Module
Step 1 Pinch the fan module release handle, and slide the module out.
Caution You should replace the fan module within 5 minutes to avoid overheating the switch.
1 Fan LED 3 Retainer clip
2 Exhaust vent 4 Extraction handles
2
1
3
4
344200