4
Figure 1 Cisco 1040 Cable Connections—Front Panel
Figure 2 shows the connection on the rear panel of your Cisco 1040 for an external, separately
certified AC/DC power supply, for use if IEEE 802.3af-compliant PoE is not available. See Cable
Specifications, page 12.
Figure 2 Cisco 1040 Cable Connections—Rear Panel
1
10/100-1—Fast Ethernet port, standard RJ45
for connecting to the network and obtaining
inline power.
This port supports IEEE 802.3af standard
PoE.
Note This port does not support Cisco
prestandard PoE.
3
Status indicator light—See Understanding the
Status Indicator Light, page 7.
2
10/100-2—Fast Ethernet port, standard RJ45
for connecting to a SPAN or Remote SPAN
(RSPAN) destination port.
—
—
10/100-1 10/100-2
POWER
141283
1
2 3
POWER
DC 5V 2.5A
141284
