71
To set the Home Time
1. Display the current Home Time.
2. Press
FUNC once to display the function menu for the HOME TIME SET
operation.
3. Press
1 to select HOME TIME SET.
• The current hour setting on the display flashes because it is
selected
.
4. Use the H and J cursor keys or
TIME/DATE to move the flashing
selection around the Home Time display. When any number is selected
(flashing), you can change it by entering a new value.
• You can change the Home Time setting even if summer time (DST) is
selected.
• Use 12-hour format if the Home Time is set for 12-hour format or 24-hour
format if the Home Time is set for 24-hour format.
• If you are using 12-hour time format, press
A to specify AM or P to specify
PM while the hour or minutes are flashing on the display.
• All illegal input (26 for the hour, 65 for the minutes) is ignored.
• Years can be input within the range of 1901 through 2099.
• An input value from 1 to 49 for the year is automatically converted to the
corresponding 21st century year (2001 to 2049). A value from 50 to 99 is
converted to the corresponding 20th century year (1950 to 1999).
5. After you set the time and date, press
SET to store them.
• The seconds count of the timepiece resets to “00'’ when you press
SET.
To switch the Home Time between 12-hour and 24-hour format
1. Display the current Home Time.
2. Press
FUNC once to display the first function menu.
3. Press
2 to select 12/24 HOURS.
• The 12-hour/24-hour setting is set up as a
toggle
setting. This means that
each time you select the 12/24 HOURS item in the function menu, the Home
Time display switches from its present setting to the opposite one.
• The 12-hour/24-hour setting you make is applied for the time displays
in the Schedule Keeper, Reminder Mode, Home Time and World Time
display.
Using the Home Time function
