Bully Dog 40366 v1.0.0 Manual

next previous



Monitor



Number of Crank Revolutions Per Minute



Shows the % diﬀ erence between transmission input shaft speed and output

shaft . Tells you in an easy-to-read % how much your transmission is slipping.



The % that engine power is reduced by a Bully Dog Module, using Tranny

Smart Software, to account for transmission slippage. Only available with a Bully Dog Rapid Power or

Dyno Dominator Module.



Temperature of vehicle coolant



Measures engine output to the ground. Due to all of the factors involved

in actual driving, the number calculated by the OutLook may not match those derived from an actual

dynamometer.



This is a performance test that displays and records how long it takes the vehicle to

go from a stand still at zero miles per hour to sixty miles Per Hour. This is a standard test that automobile

manufacturers often use to describe the low end performance of an automobile. To operate this function

simply follow the instructions displayed on the screen in one of the three quadrants chosen to display

this performance test. When bad starts occur and the test must be restarted, simply press left on the

OutLook Joystick and the performance test will restart itself and also refresh the screen instructions.