A SERVICE OF

logo

S-7000DD
2. INSTALLATION
11
<For 100V/400V system specifications>
(1) Power switch
(2) Screws [2 pcs]
Operato
r
4145M
(3) Transformer
box
(4) Transformer box plates [2 pcs]
(5) Screw [with washer]
(6) 3-pin power supply connector
(7) Staples [5 pcs]
(8) Cord clamps [2 pcs]
(9) Power cord
1. Attach an appropriate plug to the
power cord (9). (The green and
yellow wire is the ground wire.)
2. Insert the power plug into a
properly-grounded electrical outlet.
NOTE:
Take care when tapping in the
staples (7) to make sure that they
do not pierce the cords.
Do not use extension cords,
otherwise machine operation
problems may result.
0590D
Green and yellow
wire (ground wire)